Allied Telesis AT-S63 - Manual (Page 672)

Chapter 27: Protected Ports VLANs
672 Section VI: Virtual LANs
The Delete VLAN menu expands to contain the relevant information
about the VLAN. You can use the information to confirm that you are
deleting the correct VLAN. An example is shown in Figure 229.
Figure 229. Expanded Delete VLAN Menu
6. Type D to delete the VLAN or R to cancel the procedure.
If you select to delete the VLAN, the following confirmation prompt is
displayed:
Are you sure you want to delete this VLAN [Yes/No] ->
7. Type Y to delete the VLAN or N to cancel the procedure. Press Return.
If you select Yes, the VLAN is deleted and the following message is
displayed:
SUCCESS
Please make sure to manually delete any static multicast
MAC address(es) entries for this VLAN
Press any key to continue ...
All untagged ports in the deleted VLAN are returned to the
Default_VLAN as untagged ports. Any static addresses assigned to
the ports of the VLAN are now obsolete. Those addresses should be
deleted from the MAC address table. For instructions on how to delete
addresses, refer to “Deleting Unicast and Multicast MAC Addresses”
on page 152.
8. Press any key.
9. Repeat this procedure starting with Step 4 to delete other VLANs.
10. To permanently save your changes, return to the Main Menu and type
S to select Save Configuration Changes.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Delete VLAN
1 - VLAN Name .............. Sales
2 - VLAN ID (VID) .......... 3
3 - VLAN Type .............. Protected
4 - Tagged Ports ........... 7,9
5 - Untagged Ports ......... 20-24
6 - Protected Ports ........ Yes
D - Delete VLAN
R - Return to Previous Menu
Enter your selection?