Allied Telesis AT-S63 - Manual (Page 173)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 173
1. From the Main Menu, type 1 to select Port Configuration.
2. From the Port Menu, type 4 to select Port Trunking and LACP.
The Port Trunking and LACP menu is shown in Figure 41 on page 168.
3. From the Port Trunking and LACP menu, type 1 to select Static Port
Trunking.
The Static Port Trunking menu is shown in Figure 42 on page 168.
4. Type D to select Delete Trunk.
The following prompt is displayed:
Enter Trunk ID: [1 to 6] ->
5. Enter the ID number of the trunk to be deleted.
The following prompt is displayed:
Are you sure you want to delete this trunk (Y/N) [Yes/No] ->
6. Type Y for yes to delete the port trunk or N for no to cancel this
procedure.
The port trunk is deleted from the switch.
7. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.