Allied Telesis AT-S63 - Manual (Page 281)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 281
Creating a Classifier
This section contains the procedure for creating a classifier. As explained
in “Classifier Overview” on page 274, a classifier contains a series of
variables for defining a traffic flow. This same procedure is used whether
the classifier is intended for an ACL or a QoS policy.
To create a classifier, perform the following procedure
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 79.
Figure 79. Security and Services Menu
2. From the Security and Services menu, type 1 to select Classifier
Configuration.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Security and Services
1 - Classifier Configuration
2 - Port Access Control (802.1x)
3 - Denial of Service (DoS)
4 - Access Control Lists (ACL)
5 - Class of Service (CoS)
6 - Quality of Service (QoS)
7 - Keys/Certificates Configuration
8 - Secure Shell (SSH)
9 - Secure Socket Layer (SSL)
R - Return to Previous Menu
Enter your selection?