Allied Telesis AT-S63 - Manual (Page 208)

Chapter 10: File System
208 Section II: Advanced Operations
6. Enter the new file name. The file name can be up to 16 alphanumeric
characters, followed by a 3 letter extension. You must keep the same
extension as the original file. To store the file on a compact flash card,
precede the filename with “cflash:”
The following message is displayed:
Please wait...
Press any key ...
7. Press any key to return to the File Operations menu.
Examples
The following examples illustrate how to create copies of files as well as
transfer files between a switch’s flash memory and a compact flash card.
This example creates a backup copy of a configuration file called
“switch12.cfg” located in the switch’s file system and assigns the new copy
the name “switch12_backup.cfg”:
Enter the source file name: switch12.cfg
Enter the destination file name: switch12_backup.cfg
This example creates a copy of a configuration file called “sw24.cfg”
located on a flash memory card and assigns it the name “sw24_bk.cfg”:
Enter the source file name: cflash:sw24.cfg
Enter the destination file name: cflash:sw24_bk.cfg
This example copies the configuration file “sw_sales.cfg” from the switch’s
file system to a flash memory card, without changing the name.
Enter the source file name: sw_sales.cfg
Enter the destination file name: cflash:sw_sales.cfg
This example copies an event log file called “sw14_apr12.log” from the
switch’s file system to a flash memory card, and assigns it the name
“sw14.log” on the card:
Enter the source file name: sw14_apr12.log
Enter the destination file name: cflash:sw14.log
This example copies the configuration file “pdr_new.cfg” from a flash
memory card to the switch’s file system and assigns it the name “pdr.cfg”:
Enter the source file name: cflash:pdr_new.cfg
Enter the destination file name: pdr.cfg