Allied Telesis AT-S63 - Manual (Page 60)

Chapter 3: Basic Switch Parameters
60 Section I: Basic Operations
Configuring the Switch’s Name, Location, and Contact
This procedure explains how to assign a name to the switch. The name
appears at the top of the menus. Names can help you identify your
switches when you manage them and help you avoid performing a
configuration procedure on the wrong switch. This procedure also assigns
the name of the administrator responsible for maintaining the unit and the
location of the switch.
To assign a name, location, and contact to a switch, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4.
Figure 4. System Administration Menu
2. From the System Administration menu, type 2 to select System
Configuration.
Allied Telesyn AT-9424Ts - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
System Administration
1 - System Information
2 - System Configuration
3 - Console (Serial/Telnet) Configuration
4 - Web Server Configuration
5 - SNMP Configuration
6 - Authentication Configuration
7 - Management ACL
8 - Event Log
9 - System Utilities
R - Return to Previous Menu
Enter your selection?