Allied Telesis AT-S63 - Manual (Page 711)

Section VIII: Port Security 711
Chapter 30
MAC Address-based Port Security
This chapter explains how you can use the dynamic and static MAC
addresses learned or manually added to the switch’s MAC address table
to control which end nodes can forward packets through the device. The
sections in this chapter include:
ˆ “MAC Address Port Security Overview” on page 712
ˆ “Configuring MAC Address Port Security” on page 715
ˆ “Displaying Port Security Levels” on page 719
Note
This type of port security does not apply to ports located on optional
GBIC, SFP, or XFP modules.