Allied Telesis AT-S63 - Manual (Page 98)

Chapter 4: Enhanced Stacking
98 Section I: Basic Operations
3. From the Stacking Services menu, type 1 to select Get/Refresh List of
Switches.
The master switch polls the common subnet for all the slave and
master switches that are a part of the enhanced stack and displays a
list of the switches in the Stacking Services menu, as shown in the
example in Figure 18.
Figure 18. Stacking Services Menu With List of Switches
The list does not include the master switch where you started the
management session, nor any switches with an enhanced stacking
status of Unavailable.
By default, the switches are sorted in the menu by MAC address. You
can sort the switches by name by selecting option 2, Sort Switches in
New Order.
Note
Item 4, Load Image/Bootloader, uploads the AT-S63 image from the
master switch to another AT-9400 Series switch in the enhanced
stack, as explained in “Uploading the AT-S63 Image File Switch to
Switch” on page 230. Item 5, Load Configuration File, allows you to
upload a configuration file from a master switch to another AT-9400
Series switch, as explained in “Uploading an AT-S63 Configuration
File Switch to Switch” on page 233.
4. To manage a new switch, type 3 to select Access Switch.
Allied Telesyn AT-9424Ts - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Stacking Services
Switch Software Switch
Num MAC Address Name Mode Version Model
--------------------------------------------------------------------
01
00:00:00:12:34:30 Local Users Slave S63 v2.0.0 AT-9424T/SP
02 00:30:84:f3:b4:60 Engineering Slave S63 v2.0.0 AT-9424T/GB
03 00:30:84:54:02:60 Finance Slave S62 v1.0.0 AT-8524M
1 - Get/Refresh List of Switches
2 - Sort Switches in New Order
3 - Access Switch
4 - Load Image/Bootloader File
5 - Load Configuration File
R - Return to Previous Menu
Enter your selection?