Deleting a traffic class, Figure 118: destroy traffic class menu – Allied Telesis AT-S63 User Manual

Page 356

Advertising
background image

Chapter 16: Quality of Service

356

Section II: Advanced Operations

Deleting a Traffic

Class

To delete a traffic class, perform the following procedure:

1. From the Main Menu, type 7 to select Security and Services.

2. From the Security and Services menu, type 6 to select Quality of

Service.

The Quality of Service (QoS) menu is shown in Figure 108 on page
341.

3. From the Quality of Service (QoS) menu, type 2 to select Traffic Class

Configuration.

The Traffic Class Configuration menu is shown in Figure 115 on page
350.

4. From the Traffic Class Configuration menu, type 3 to select Destroy

Traffic Class. The following prompt is displayed:

Available Traffic Class(es): 0-7
Enter Traffic Class ID : [0 to 511] -> 0

5. Enter the ID number of the traffic class you want to delete. You can

delete only one traffic class at a time. The selected traffic class is
displayed in the Destroy Traffic Class menu. An example is shown in
Figure 118. You can use the menu to verify that you are deleting the
correct traffic class.

Figure 118. Destroy Traffic Class Menu

6. Type D to delete the traffic class.

Allied Telesyn AT-9424T/SP - AT-S63

Marketing

User: Manager

11:20:02 02-Mar-2005

Destroy Traffic Class

1 - Traffic Class ID .......... 11
2 - Description ............... Video2
3 - Exceed Action ............. Drop
4 - Exceed Remark Value ....... 0
5 - DSCP value ................ 0
6 - Max bandwidth ............. 0
7 - Burst Size ................ 0
8 - Priority .................. 0
9 - Remark Priority ........... No
A - ToS .......................
B - Move ToS to Priority ...... No
D - Move Priority to ToS ...... No
E - Flow Group List ........... 6

D - Destroy Traffic Class
R - Return to Previous Menu

Enter your selection?

Advertising