Allied Telesis AT-S63 - Manual (Page 348)

Chapter 16: Quality of Service
348 Section II: Advanced Operations
Active
The status of the flow group. If the flow group is part of a QoS policy
that is assigned to one or more ports, the flow group is deemed active.
If the flow group has not been assigned to a policy or if the policy has
not been assigned to any ports, the flow group is deemed inactive.
5. To display the specifics of a flow group, type D to select Display Flow
Group Details.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
6. Enter the ID number of the flow group you want to view. You can
display only one flow group at a time.
The specifications of the selected flow group are displayed in the
Display Flow Group Details menu. An example is shown in Figure 114.
Figure 114. Display Flow Group Detail Menu
The Display Flow Group Details menu provides the following
information:
Flow Group ID
The flow group’s ID number.
Description
The flow group’s description.
DSCP value
The replacement value to write into the DSCP (TOS) field of the
packets.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Flow Group Details
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - ToS ........................
7 - Move ToS to Priority ....... No
8 - Move Priority to ToS ....... No
9 - Classifier List ............ 11
U - Update Display
R - Return to Previous Menu
Enter your selection?