Allied Telesis AT-S63 - Manual (Page 64)

Chapter 3: Basic Switch Parameters
64 Section I: Basic Operations
3. From the Authentication Configuration menu, type 5 to select
Passwords Configuration.
The Passwords Configuration menu is shown in Figure 7.
Figure 7. Passwords Configuration Menu
4. From the Passwords Configuration menu, type 1 to select Set
Manager Password.
The following prompt is displayed:
Enter Current Manager Password ->
5. Type the current manager password (the default is “friend”) and press
Return.
The following prompt is displayed:
Enter New Manager Password ->
6. When prompted, re-enter the new password.
7. Type 2 to select Set Operator Password.
The following prompt is displayed:
Enter New Operator Password ->
8. Type the current operator password (the default is “friend”) and press
Return.
Note
A password can be from 0 to 16 alphanumeric characters.
Passwords are case sensitive. You should not use spaces or special
characters, such as asterisks (*) or exclamation points (!), in a
password if you are managing the switch from a web browser. Many
web browsers cannot handle special characters in passwords.
Allied Telesyn AT-9424Ts - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Passwords Configuration
1 - Set Manager Password
2 - Set Operator Password
R - Return to Previous Menu
Enter your selection?