CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 176)

158
3.6 Automatic Video Snapshots
The Video Snapshot allows the system to continuously take 2 snapshots every second as monitoring
starts. This function gives you a choice to keep the surveillance images in still images or JPEG format
when you don’t have enough disk space to store AVI-format videos.
Note: After you start monitoring, the system will continue to take video snapshots whether there is
motion or not.
3.6.1 Setting Video Snapshots
You can select up to 16 cameras to take video snapshots.
1. Click the Configure (No. 14, Figure 1-2) button, select Video Analysis and select Object/Index
Monitor Setup. The Camera Applied Object Index/Monitor dialog box appears.
2. Select the desired cameras to be configured.
3. Click the Configure button. This dialog box appears.
Figure 3-24