CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 581)

Useful Utilities
563
11
11.9.2 Enabling Backup Server
Before you activate the Backup Server, ensure the connection between the storage system and
GV-System has been built and newly-added disk volumes have been formatted as well.
1. On the GV-System, click the Network button (No. 11, Figure 1-2), and select Backup Server.
The Geo Backup Server dialog box appears.
2. Click the Edit button and select locations to store the backup files.
3. Select Copy Viewlog to backup drives if you want to copy the ViewLog application to each of
the partition selected.
4. Click OK.
5. Click the Login button to connect to the storage system.
Figure 11-49
Note: When Copy Viewlog to backup drives is selected, a ViewLog folder and Backup Server
Viewlog.bat will be created in the selected partitions after backup is completed. Double-click
Backup Server Viewlog.bat to run ViewLog and to load the recorded events into ViewLog.