CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 335)

I /O Applications
317
6
6.6.10 Managing a Group of I/O Devices
With groups of I/O devices set up on the I/O Advanced Panel, you can enable or disable these I/O
devices by groups.
Enabling a Group
On the I/O Advanced Panel, right-click a desired group and select Start Monitoring. All input devices
of this group are now enabled. When inputs are triggered, outputs will be activated in cascade mode.
Disabling a Group
On the I/O Advanced Panel, right-click a desired group and select Stop Monitoring. All input devices
of this group are now disabled. No cascade triggers will occur.
Pausing the Triggered Inputs
This feature is designed for a group of outputs set to be Toggle mode. When inputs activate outputs in
cascade triggers, right-click this group and select Pause Monitoring. The inputs of the group will be
reset, but the outputs keep on alarming.
Note: With the System-Wide Output option (see System-Wide Triggers above) activated, you
cannot use these three options to manage a group of I/O devices.