CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 32)

14
1.2.2 Setting Data Storage
You can change storage locations of recorded files and event database files. You can also enable or
disable the recycle function for recorded files.
Click the Configure button (No. 14, Figure 1-2), select System Configure, and select General
Setting. In the General Setting dialog box, you can see the storage information in the middle as
illustrated below.
Figure 1-6
„ Available: Indicates the remaining hard disk space.
„ Recycle Log: Indicates the recording date of the next video file to be deleted.
„ Recycle: When this option is selected, the oldest files will be deleted when the system requires
storage space for new files. If it is not selected, the system will stop recording when disk space is
full.
~ Right-Arrow button: Select the Enlarge Recycle Threshold option and specify the recycle
threshold. Recycle threshold is the file size at which the recycling begins. The upper limit of
the recycle threshold is 99999 MB.
By default, the system has the following default settings.
Default Data Storage Settings
Recorded Files :\GV folder\<camxx or audxx folder>. Storage Location
Event Database Files :\GV folder\<camxx or audxx database file>
Recycle Function Enabled