CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 312)

294
2. Input (N/O + Latch Trigger) + Output (N/O Toggle + Keep Last Toggle Status)
When “Latch Trigger” works with “Keep Last Toggle Status”, the output only has a momentary trigger
but also needs to remain ON even when you stop monitoring or restart the system. Therefore under
the two conditions, the output turns off until a new input trigger.
Input
Output
N/O N/O N/O
N/C N/C N/C
1st Input Trigger 2nd Input Trigger
Stop monitoring /
Restart the system