2 allowing remote control at dvr, 2 allowing, Remote control at dvr – CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System User Manual
Page 598
Advertising
580
11.11.2 Allowing Remote Control at DVR
The network traffic of WebCam server can be controlled when the DVR permits the remote control
from the Bandwidth Control program by the following steps:
1. Click
the
Network button (No.11, Figure 1-2), and select WebCam Server.
2. On the General tab, select the Run Bandwidth Control server option. When this option is
enabled, on the Control Center Server option list, the “Bandwidth Control Service” is marked with
a check.
Advertising