CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 492)

474
9.3.1 Setting the Pop-up Map Function
The E-Map Viewer window can be set to pop up with the blinking icons indicating that cameras or input
devices are being triggered. To set up the function, follow the steps below.
1. Click the Popup Settings button (No.1, Figure 9-5).
2. Select desired cameras and input devices for the application, and specify Dwell Time for the
interval between pop-up maps. Any event trigger will be ignored by the system during the interval
to avoid map popping up frequently.
3. Click the Toggle Popup button (No.2, Figure 9-5) to enable the function.
4. Minimize the E-Map Viewer window. Once any camera or input device is triggered, the map will
pop up on your screen immediately.