CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 98)

80
1.10.1 Setting Email Server
To send e-mail notification, you need to first set up your mail server as described below:
1. In the Send Alerts Approach Setup dialog box (Figure 1-61), enable Default Alert Approach,
select E-Mail and click the Setting button. This dialog box appears.
Figure 1-63
2. In the Mail Setup section, set up the following fields:
„ SMTP Sever: Type your mail server’s URL address or IP address.
„ E-Mail From: Type the sender’s e-mail address.
„ E-Mail To: Type recipients’ e-mail addresses. For multiple recipients, add a semicolon
between each e-mail address.
„ Charset: Select the character set for outgoing e-mails.
„ Subject: Type a subject that comes with the alert message.
3. Click the Test Mail Account button to send a test e-mail and see whether the setup is correct. If
the connection attempt fails, you may also need to check the settings of SMTP Mail Server
requires authentication and SMTP Server described below.
Other options on the E-Mail dialog box:
[Attach Image Setup] Select Attach to include up to 6 snapshots in the e-mail. The image format and
size are selectable from drop-down lists.