CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 315)

I /O Applications
297
6
6.3.1 Setting Up Actions Upon Input Trigger
This section helps you set up the actions to be taken after the input device is triggered and whether to
recycle input-triggered events or not.
Figure 6-8
Select an Input number to be set up. Clicking the Finger button can apply the same settings to all
inputs.
[Monitor Input]
„ Rec Video: Select this option to use the input (sensors or detectors) to trigger recordings on
multiple cameras. Specify the recording duration and click the Arrow button to select which
camera to record upon input trigger.
„ Invoke Alarm: Select this option to activate computer alarm when the input is triggered. You can
select the alarm sound from the drop-down list.
„ Invoke to Send Alerts: Select this option to send out the predefined alert (E-Mail/Hotline/SMS)
when the input is triggered. For e-mail alerts, see E-Mail Notification in Chapter 1; for hotline alerts,
see Hotline Notification in Chapter1; for SMS alerts, see Short Message Service in Chapter 10.
1st Right Arrow button: Appears when E-Mail is the predefined alert. Click the button to select
the camera(s) to take a snapshot upon input trigger. The snapshot will be sent out by E-Mail.
2nd Right Arrow button: Sets the time to delay the activation of assigned alerts
(E-Mail/Hotline/SMS).