CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 357)

Point-of-Sale (POS) Application
339
7
7.6 Abnormal Transaction Alerts
When an abnormal transaction of the specified transaction item occurs, this function can automatically
activate the output device and send out assigned E-Mail/SMS/Pager alerts. To set up this function,
follow these steps:
1. Follow the instructions in POS Filed Filter earlier in this chapter to set up a transaction item first.
2. In the POS Capture Data Setting dialog box (Figure 7-15), click the Loss Prevention Setting
button. This dialog box appears.
Figure 7-18 Loss Prevention Setting
[Alarm Conditions] Check this option and define the price range for an alarm condition. For this
example, when the price amount in a transaction is great than or equal to (>=) 10000 and less
than or equal to (<=) 100000, the assigned alarm will be activated.
[Alarm Output] Assign an installed output module for the application.
[Alert Message] Enter a desired alert message. To set up a notification type (E-Mail/Hotline/SMS),
refer to Send Alerts Approach in Chapter 1.