CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 75)

Configuring Main System
57
1
„ I/O error: Appears if associated I/O module failed.
„ I/O resume: Appears if associated I/O module resume to action.
„ Missing Object: Appears if objects miss from a defined camera view.
„ Unattended Object: Appears if unattended objects show up within a defined camera view.
„ Intruder: Appears if there are objects entering a defined region.
„ Disk Full: Appears if storage space is full.
„ Scene Change: Appears if the associated camera has been physically tampered.
„ Network Shutdown: Appears if the network connection is closed.
„ Camera Connection Lost: Appears if the connection to the associated cameras is lost.
„ Camera Connection Resumed: Appears if the connection to the associated camera is
rebuilt.
„ Tampering Alarm: Appears if the camera is physically tampered with.
„ Face Count: Appears if faces are detected under Mask Filter or if no faces are detected
under Mask Filter (Inverse Alarm).
[System] This function shows which functions are being enabled or disabled in the GV-System.
Figure 1-42
ID: Displays the event ID number
Time: This column shows the time when system event occurs.
Event: This column shows the following messages when associated actions are taken.
„ Schedule Start / Stop: Appears when a user starts or stops the monitoring schedule.
„ Auto Reboot: Appears when the system performs auto rebooting function.
„ System Start / Exit: Appears when a user starts or stops GV-System.
„ Start / Stop Monitor All: Appears when a user starts or stops all cameras’ monitoring
functions.
„ Start / Stop Monitor: Appears when a user starts or stops the individual camera’s monitoring
function. The camera number will appear in Device column.