CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 76)

58
„ IO Monitor Start / Stop: Appears when a user starts or stops the individual I/O module’s
monitoring function. The I/O module number will appear in the Device column.
„ WebCam Svr Start / Stop: Appears when a user starts or stops WebCam Server.
„ Connect to Center Start / Stop: Appears when the GV-System connects or disconnects with
the Security Center.
„ Twin Svr Start / Stop: Appears when a user starts or stops Twin Server.
„ Connect to Center V2 Start / Stop: Appears when the GV-System logs in or out Center V2.
„ Connect to VSM Start / Stop/Net Down / Net Resume: Appears when the GV-System logs
in or out VSM; when the connection of both fails or resumes.
„ Connect to SMS Start / Stop / Net Down / Net Resume: Appears when the GV-System logs
in or out the SMS server; when the connection of both fails or resumes.
„ Send Email Alert: Appears when an e-mail alert is sent out.
„ Send SMS Alert: Appears when an SMS alert is sent out.
„ Send Hotline Alert: Appears when a Hotline alert is sent out.
„ Windows Shutdown: Appears when Windows is closed.
„ Recycle: Appears when the GV-System recycles event files to increase storage space.
„ Auto-Reboot: Appears when Windows is automatically rebooted.
Device: This column shows the individual camera number.
Mode: This column shows whether actions are being taken in local side or remote side.
[Login] This function shows whom and when has logged in and out the GV-System and WebCam
server.
Figure 1-43
ID: Shows the event ID number.
Time: This column shows the time when Login event occurs.
User Login: This column shows the ID of the login user.
User Logout: This column shows the ID of the logout user.