CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 525)

Useful Utilities
This chapter discusses some advanced features and utilities that could help the administrator to
maximize system performance in a security network.
11.1 Dynamic DNS
The Dynamic DNS is an application that allows users to register domain names that always point to
their GV-Systems. This application is only necessary when your GV-System is using a dynamic IP
address. If so, the DDNS will update GV-System’s IP address to DNS Server every 10 minutes.
Therefore, even if your GV-System’s IP address changes, you can still locate it by using the registered
domain name.
Dynamic DNS supports Windows XP, Windows Vista, Windows Server 2008 and Windows 7, but it
does not support Windows 95/98 or ME.
Dynamic DNS uploads IP addresses over the Internet through ports 80 and 81. If your GV-System is
connected behind a router or firewall, make sure ports 80 and 81 are enabled. Dynamic DNS will only
upload global IP addresses. If your GV-System is using virtual IP, NAT port mapping should be done
first.
IMPORTANT: The DDNS service is provided purely as a favor to you. We hope it simplifies the process
of trying to connect an IP video device to the network. GeoVision does not and cannot warrant that the
DDNS service will be uninterrupted or error free. Please read Terms of Service carefully before using
the service. Besides GeoVision, you can also obtain the free DDNS service from these providers:
DynDNS.org and No-IP.com.
CHAPTER
11