CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 542)

524
11.3.2 Running the Watermark Proof
1. Go to the GV folder, and run WMProof.exe.
Figure 11-13
2. In the Watermark Proof window, click File from the menu bar, select Open and locate the recorded
file (.avi). The selected file is then listed on the window. Alternatively, you can drag the file directly
from the storage folder to the window.
3. If the recording is unmodified, a check mark will appear in the Pass column. On the contrary, if the
recording is modified or does not contain watermark during recording, a check mark will appear in
the Failed column. To play the recording, double-click the listed file on the window.