CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 540)

522
11.2.5 TwinDVR Settings
Network Card Settings
In Figure 11-9, click the Setting button, and then select Network Setting to display the following
dialog box. The Network Setting option is only necessary when your TwinDVR has more than one
network card. Select Assign IP and select one network card. This will automatically bring up Blind IP
of the network card. The network card will be used for connecting to TwinServer; the other network
card will be assigned for connecting to Internet. If you want the TwinDVR to automatically reconnect to
TwinServer, select Retry until connected and set the time interval.
Figure 11-11 TwinDVR Setting
System Settings
In Figure 11-9, click the Setting button, and then select System Configure to display the following
dialog box. The option is only available when TwinDVR is connecting to TwinServer.
Figure 11-12 System Settings
[Startup Setting]
„ Extended Server: Activates Extended Server on TwinDVR startup.
„ WebCam Server: Activates WebCam Server on TwinDVR startup.
[System Setting]
„ TwinDVR resume: Resumes TwinDVR connection when the system shuts down unexpectedly.