CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 645)

Useful Utilities
627
11
11.18.2 Starting the MCamCtrl Utility
1. Go to Windows Start, point to Programs, select MCamCtrl, and then run MCamCtrl. The
MCamCtrl dialog box appears.
Figure 11-103
2. Leave both ID and Name fields blank.
3. In the Startup Type field, select Manual or Automatic to run MCamCtrl at next startup.
4. To adjust the PTZ speed, use the slide bar.
5. In the Device field, select the port connecting to the GV-Joystick. To find out the port number the
GV-Joystick is using, go to Windows Device Manager and look for the Prolific USB to Serial
Bridge entry under the Ports (COM & LPT) section.
6. Click the Start Service button ► to start the service.
7. Keep the MCamCtrl Utility running in the background, and open the Web interface of the GV IP
device to begin controlling the PTZ movement using GV-Joystick.