CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 619)

Useful Utilities
601
11
[Video Enable] Check or uncheck the desired channels displayed on monitor screen.
[Scan Setting]
„ Interval: Enter the interval between the scanned pages (see Figure 11-80 for the scanned page).
Set the time between 1 and 999 seconds.
„ Scan by: Select Auto to scan the channels automatically or Manual to scan at your speed.
[Setting]
„ Camera Popup: See Setting Pop-up Views below.
„ TV Setting: Click the Setting button to display this dialog box.
Figure 11-83
Press the 4 direction buttons (U, L, R and D) to adjust the positions of the divisions on the monitor
screen.
To display the camera number on the TV monitor, check the Show Camera Number option. To
display the camera numbers on all connected TV monitors, check the Show Camera Number
option, and then click the finger button.
To change the color of the camera number indicator on the TV monitor, use the Color drop-down
list to select the desired color.