CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 534)

516
11.2.1 Starting TwinServer
1. In the Main System, click the Network button (No. 11, Figure 1-2), and then select TwinServer.
This dialog box appears.
Figure 11-7 TwinServer Settings
2. The default port 9650 is for video transmission. Keep it as default or modify it if necessary. Using
UPnP for automatic port configuration to your router, click the Arrow button. For details, see
UPnP Settings in Chapter 8.
3. Select the type of network to be used: Use TCP/IP or Use Multicast. If Use Multicast is enabled,
click the Setting button to display the Multicast Setting dialog box. See Multicast Settings later in
this chapter.
4. Use the Video Quality Setting slider to adjust video quality for Low, Med, or High.
5. Click the Start button to activate the TwinServer.