CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 601)

Useful Utilities
583
11
11.11.5 Bandwidth Setup
You can specify the total bandwidth allocated to a WebCam server. You can also specify the bandwidth
for certain users and IP addresses. This is especially useful when your network is busy or heavily
loaded.
1. Click Configure on the menu bar, and select Bandwidth Setup. A dialog box prompts for you to
select a host.
2. Select the desired WebCam server, and click OK. This dialog box appears.
Figure 11-65
„ Bandwidth limit: Select this option, and define the total bandwidth that the WebCam server
will be allowed to use on your network.
„ By IP: Click the Add button, and specify a specific IP address or a range of IP addresses and
its bandwidth limit.
„ By Username: Click the Add button, and specify the user name and its bandwidth limit.
Note: If you have already specified the total bandwidth to a WebCam server, it is prioritized before
the bandwidth limits set to user names and IP addresses.