CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 336)

318
6.7 Visual Automation
The Visual Automation helps you automate any electronic device by triggering the connected output.
You can intuitively click on the image of the electronic device to change its current state, e.g. light ON.
6.7.1 Setting Visual Automation
1. On the main screen, click the Configure button (No.14, Figure 1-2), point to Accessories, and
select Visual Automation Setting. This dialog box appears.
Figure 6-34
2. Select the desired camera from the drop-down list, and check Enable.
3. Drag the region on the image of the desired device. This dialog box appears.
Figure 6-35
4. Select the connected module and output device. In the Note field, type a note to help you manage
the device. Click OK to save the configurations.
5. To change the frame color of the set region, click the Set Color button.
6. To emboss the set region, check the Float Up option; or keep them flat by checking the Normal
option.