CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 215)

Video Analysis
197
3
14. Start monitoring to run the application.
When any unattended object is detected in the camera view for the specified time, its location will be
highlighted in live video, the selected alarm or output will be activated, and the event will be recorded
as Advanced Unattended Object in System Log for later retrieval.
If you do not select Automatically Disable Alarm, you can stop all types of triggered alerts by this
step: Right-click on the camera image which has a flashing box indicating a triggered alert, select
Camera, select Advanced Unattended Object Detection and select either Reset Background
Model or Reset Alert.
„ Reset Background Model: Rebuilds the reference image and resets the triggered alert. The
replaced reference image will be used as the base image for comparison with images on the
camera view to detect changes. The system will accept the unattended object from this point on
and no longer generate any alert for it.
„ Reset Alert: Disables and resets the triggered alert. After the alert is reset if the object remains
unattended over the specified tolerance time, the system will still detect it as an unattended
object and keep generating alert.
.