4 starting e-map from a remote site, 1 the remote e-map window, Starting e-map from a remote site – CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System User Manual
Page 493: 1 the, Remote e-map window
Advertising
E-Map Application
475
9
9.4 Starting E-Map from a Remote Site
Activating and viewing E-Maps over a web browser is possible through the WebCam server. To do so,
follow the steps below.
1. At the local server equipped with the GV-System, click the Network button (No. 11, Figure 1-2)
and select WebCam Server to display the Server Setup dialog box. Click OK to start the
WebCam server.
2. At the client PC, open the web browser and type the address of the local server. Once the
connection is established, the Single View page will appear.
3. On the left panel, click Remote E-Map to display the E-Map window on the client PC.
9.4.1 The Remote E-Map Window
1
2
3
4
5
6
7
8
9
10
7
11
12
Figure 9-6 The Remote E-Map Window
Advertising