CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 624)

606
2. Click the Display list. If you do not see multiple monitors listed, check if your additional monitors
are connected with the computer properly.
3. Select the primary monitor from the list, and select Use This Device as the Primary Monitor.
4. Select additional monitors from the list, and select Extend my Windows desktop onto this
monitor for each monitor.
5. Click Identify. Windows XP displays a large number to identify your monitors. Drag and drop the
monitor icons to match the physical arrangement of your monitors.
6. Click OK.
7. Start the GV-System, click Configure, click Accessories, select Digital Matrix Setting, select
monitors from the Display list and select Activate for each monitor. For example, if you install 7
additional monitors, you need to activate Display 1 to Display 7 one by one.
8. Click Apply. Your additional monitors should now display the channels seen on the primary
monitor. See the figure below for example.
Figure 11-88
Primary Monitor
(Monitor 1)
Monitor 2 Monitor 3 Monitor 4