CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 556)

538
b. To log into the server using your current login information, select Connect with the current
login information. To log into the server using the login information of its administrator, select
Connect with administrator login information and type the User Name and Password.
c. Click Test Connection to see if you can connect to the server with Active Directory.
4. To assign groups in Active Directory to User, Poweruser or Supervisor authority levels:
a. Click the Assign Authority Level button. This dialog box appears.
Figure 11-29
b. Select the groups detected in Active Directory from the left side and use the arrow buttons
to assign the groups to User, Poweruser or Supervisor level.
c. Click OK. The user data will be imported into the Password Setup window.
5. To automatically update changes to user data in Active Directory, select Auto Update and type
the update frequency in minutes.
6. To manually reload user data, click the Reload User Data button. Note that the current user data
will be removed.
7. Click OK and restart Authentication Server to apply the settings.