Metrohm 833 IC Liquid Handling Unit - Manual (Page 105)

10.2 Standard equipment
830 IC Interface / Gebrauchsanweisung 8.830.1001
97
1 6.2744.034 PEEK coupling
Connection between 6.2744.010 PEEK
compression fitting and 6.1826.0X0 Pump
tubing;
Set of 2 pieces
2 6.2744.160 PEEK coupling
With tubing security device for connecting to
pressure side of 6.1826.0X0 Pump tubing.
2 6.2821.120 Filter unit PEEK 2 µ m
To avoid contamination by abraded pump
tubing particles.
Spare part: 6.2821.130 Filter
10.2.3 833 IC Liquid Handling Sample Preparation Unit
The 2.833.0030 IC Liquid Handling Sample Preparation Unit includes the following
accessories:
Number Order no. Description
1 1.833.0010 833 IC Liquid Handling Unit
1 6.2122.0X0 Mains cable
to customer’s specification:
Cable socket Cable
plug
Type IEC 320/C 13 Type SEV 12 (CH … )............................... 6.2122.020
Type IEC 320/C 13 Type CEE (7), VII (D … )........................... 6.2122.040
Type CEE (22), V Type NEMA 5-15 (USA … ) ...................... 6.2122.070
1 8.833.0010 Instructions for Use (English)
for 833 IC Liquid Handling Unit
2 6.2128.180 Remote connection cable
Connection cable 830 IC Interface–
833 IC Liquid Handling Unit
1 6.2143.210 Connection cable
Connection cable 732/819 IC Detector –
833 IC LH Suppressor Unit
Control via Remote line 1 and 2.
1 1.793.0110 Sample preparation module
1 6.1803.020 PTFE capillary tubing
Length = 5 m
2 6.1826.010 Pump tubing
PVC (Tygon  ) with two permanently
attached white-white stoppers;
i.d. = 1.02 mm
± 0.05 mm,
delivery rate 1.41 mL/min (20 min -1 )
1.69 mL/min (24 min -1 )
400
150
25
54
1.57 0.97
23
9.5
11