Metrohm 833 IC Liquid Handling Unit - Manual (Page 60)

7 833 IC Liquid Handling Dialysis Unit
833 IC Liquid Handling Unit / Instructions for Use 8.833.1003
52
delivering the sample. One channel of each pump is used to transfer
solution to the dialysis cell, the second channel is required to remove
solution from the dialysis cell. This setup ensures constant flow and
equal pressure conditions on both sides of the dialysis membrane.
7.2 Electrical connection
7.2.1 Dialysis without suppression
The electrical connections of the system, consisting of 819 IC Detector,
820 IC Separation Center (2.820.0X10; 1-channel), 818 IC Pump, 833 IC
Liquid Handling Dialysis Unit, 833 IC Liquid Handling Pump Unit and
830 IC Interface are shown in Fig. 16:
Fig. 16: Connecting the 833 IC Liquid Handling Dialysis Unit to a modular
dialysis system without suppression
Make sure that the remote control of the peristaltic pumps 833 Pump
and 833 Dialysis via 6.2143.210 cable (see Section 3.1.2)
corresponds to the remote configuration of the detector program (see
Section 7.3.1).
830
820
818
819
PC
6.2134.100
6.2134.090
6.2134.130
6.2143.210
6.2115.070
6.2125.090 6.2134.040
833 Pump
833 Dialysis