Metrohm 833 IC Liquid Handling Unit - Manual (Page 31)

3.3 Operation
833 IC Liquid Handling Unit / Instructions for Use 8.833.1003
23
3.3 Operation
The 833 IC Liquid Handling Unit is operated completely via the
Metrohm «IC Net» software.
This Section only described the most important functions and settings
for operating the 833 IC Liquid Handling Unit. Further information is
given in the Instructions for Use of the «IC Net» and in the online help
for the program.
3.3.1 Switching the instrument on/off
Remote control of the 833 IC Liquid Handling Unit by the software
requires that the instruments has been installed correctly as described
in Section 2.
Switching the instrument on/off
POWER
The 833 IC Liquid Handling Unit is switched on and off with
mains switch 8 on the rear panel of the instrument (see Fig. 2):
I Instrument switched on
0 Instrument switched off
When the instrument has been switched on mains lamp 1 lights
up to show that it is ready for use.
3.3.2 Program settings
The 833 IC Liquid Handling Unit is operated completely via the
Metrohm «IC Net» software.
This section only describes the most important functions and settings
for operating the 833 IC Liquid Handling Unit. Further information is
given in the Instructions for Use of the «IC Net» and in the online help
for the program.
3.3.2.1 833 IC Liquid Handling Unit icon
2.833.00X0 IC Liquid Handling Unit
For differentiating between which version of the 833 is indicated by the
instrument icon a tool tip with the name of the corresponding
instrument appears when the mouse cursor is placed on the particular
icon.