Metrohm 833 IC Liquid Handling Unit - Manual (Page 107)

10.2 Standard equipment
830 IC Interface / Gebrauchsanweisung 8.830.1001
99
2 6.1826.040 Pump tubing
PVC (Tygon  ) with 2 permanently attached
black-black stoppers;
i.d. = 0.76 mm
± 0.05 mm,
delivery rate 0.75 mL/min (20 min -1 )
0.90 mL/min (24 min -1 )
400
150
7 6.1803.040 PTFE capillary
Length = 1 m
1 6.1831.050 PEEK capillary
Length = 40 cm
1 6.1831.060 PEEK capillary
Length = 1 m
1 6.2621.070 Allen key 5 mm
For socket head screws of dialysis cell
1 6.2729.010 Dialysis cell, Plexiglas
with following accessories:
1
× E.301.0111 Sealing ring made of NBR
5 × V.022.6030 Screw made of steel
5 × 4.754.4090 Washer made of POM for
screw
4 × 6.2744.060 Blank stopper for closing
off inlet and outlet
openings
1 6.2714.010 Dialysis membrane
Cellulose acetate;
47 mm dia.; nominal pore size 0.2
µ m.
Set of 50 pieces
1 6.2057.010 Cell holder
For fixing the dialysis cell in the 820 IC
Separation Center
1 6.2744.000 PVDF compression fitting
For connecting 6.1803.0X0 PTFE capillaries
to the dialysis cell,
Set of 5 pieces
1.59 0.5
1.59 0.5
1.59 0.5
80
28
SW5
21