Metrohm 833 IC Liquid Handling Unit - Manual (Page 39)

5.1 Connection of the Suppressor module
833 IC Liquid Handling Unit / Instructions for Use 8.833.1003
31
5 833 IC Liquid
Handling
Suppressor Unit
This instrument version can be used for retrofitting a 2.820.0X20 IC
Separation Center with two injectors or a 2.761.0010 Compact IC for
chemical suppression in an easy way. It consists of the 833 IC Liquid
Handling Unit basic instrument and the 1.753.0100 Metrohm
Suppressor Module MSM.
24 Suppressor module
25 Suppressor connection
with permanently attached inlet
and outlet capillaries
26 Connection cable
connection cable to 833 IC Liquid
Handling Unit
Fig. 9: Suppressor module 1.753.0100
5.1 Connection of the Suppressor module
The 1.753.0100 Suppressor module must first be inserted in the
2.820.0X20 IC Separation Center and connected to the 833 IC Liquid
Handling Unit. Connections are then made to the inlet and outlet
capillaries mounted on the suppressor. Proceed as follows (underlined
numbers ## refer to parts and controls in the 819/820 Instructions for
Use):
1 Insert suppressor module
• 820.0X20 IC Separation Center (2-channel system):
Place suppressor module 24 inside the chamber on the floor,
see Fig. 24, 819/820 Instructions for Use).
1
3 2
26 25 24