ADS Environmental Services FlowShark QR 775002 A4 User Manual
Page 111
4-30
ADS FlowShark Manual
9. Run the antenna cable through the bottom of the base into the
trench.
10. Lay the cable in the trench, and run the cable through the pre-
drilled hole in the corbel.
11. Coil the slack antenna cable and secure it against the opposite
side of the manhole from the sensor cables. Slack enables the
technicians to remove the monitor from the manhole for
maintenance or service activities with the antenna cable still
connected. Do not bundle the antenna and sensor cables
together! This can significantly diminish antenna and sensor
signal strength, disrupting communications and limiting sensor
accuracy.
Note: To prevent damage to the cable and antenna, do not
kink or bend the antenna cable when coiling.
Installation with monitor and antenna cable in manhole