ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 216)

10-4 ADS FlowShark Manual
Replacing the Monitor Battery Packs
Check the battery voltage using Profile before installing the
monitor and after collecting data. Replace the battery packs as soon
as possible whenever the voltage reads below 8.0 volts or Profile
provides a Low battery status.
Warning: Batteries reading below 8.0 volts may prevent
communication with and data collection from the monitor.
Check the current battery voltage in the monitor using the
Diagnostics tool in Profile in the following way:
1. From the Profile software main screen, select the monitor and
then select the Diagnostics toolbar button (or select Tools >
Diagnostics from the main menu).
2. On the Diagnostics dialog, select the Connect button to
establish communication with the monitor.
3. Once communication is established, select Monitor Status
from the Functions drop-down list and then select the Perform
button.
The Print Preview dialog displays the current system information,
including the monitor battery voltage, in printable format. Select
the Print button to print the report contents.