ADS Environmental Services FlowShark QR 775002 A4 User Manual

Page 92

Advertising
background image

Communication

4-11

6. Heat the socket until the solder inside melts, and then insert the

wire into the socket:

 Insert the blue wire into socket A (tip)

 Insert the blue/white-striped wire into socket D (ring)

Soldering the wires to the designated sockets

7. Wrap the exposed wire ends with small pieces of plastic or tape

to prevent a possible short from occurring if they contact
during the potting process.

8. Slide the plastic potting collar over the soldered wires, and

secure the collar onto the threaded portion of the metal
connector.

Advertising