ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 124)

External Power 5-5
The internals of the power supply are shown below (as fitted with
an AC power cord and the ADS 5000-0697 External Power Cable).
After termination and testing, securely tighten the cable grip fittings
and install the enclosure cover. Be sure the cover aligns with the
gasket evenly, and that all screws are tightened equally (snug but
not overly tight).
12 VDC power supply (inside view)
Installation of the External Power Cable
The ADS External Power Cable (p/n 5000-0697) is required to
connect external power to the monitor. The ADS cable is 0.25” in
diameter with an ethylene/propylene copolymer jacket, 10 feet long,
and suitable for direct burial. If additional length is required, an
appropriate gauge of cable for the end run to the power source must
be selected.