ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 188)

8-1
C H A P T E R 8
Analog Input/Output Installation
and Configuration
Several models of ADS ® FlowShark ® flow monitors are available
for monitoring signals from other equipment via analog inputs and
sending signals or information to other equipment via analog
outputs. This chapter describes how these inputs and outputs are
used and configured and provides some typical connection
configurations. It also includes the power requirements for the
analog outputs.
The following FlowShark models support analog inputs and
outputs:
 5000-CG
 5000-CG-1
 5000-CL
 5000-CS
Warning: Never attempt to connect to a third party
system or connect/interrupt the supply of a signal to
another system without having an owner representative
present. In some cases, these activities may disable or
interrupt a critical automated process (e.g., pump control),
cause a dangerous condition (e.g., overpressure), or
generate false alarms.