ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 23)

2-10 ADS FlowShark Manual
Analog Board
The Analog board (ADS p/n 5000-0515) controls the sampling of
the FlowShark sensors. It receives signals from the DSP board
telling it when to initiate sensor readings for the Ultrasonic,
Pressure, and Velocity sensors. Once the sensor readings are
acquired, the Analog board sends the readings to the DSP for
storage in the FlowShark monitor memory. A seven-segment (SS)
light-emitting diode (LED) located on the Analog board indicates
the current operational activity.
FlowShark analog board (ADS p/n 5000-0515)
Communications Board
Note: This board is present only in B series monitors
(regardless of serial number) and certain A and C series
monitors based on the serial number for the particular
model. Refer to the table on page 2-8 to determine
whether the monitor serial number corresponds to a unit
with this independent Communications board.