ADS Environmental Services FlowShark QR 775002 A4 User Manual
Page 112
Communication
4-31
12. Seal the space between the antenna cable and the corbel hole
with electrical duct seal or as required to prevent infiltration
into the manhole.
13. Backfill the trench, the area surrounding the base, and the
inside of the base to ground level. Make sure you firmly pack
the backfill in the trench beneath the cable at the corbel hole.
This provides a firm surface to protect the cable from possible
crimping as the backfill accumulates and packs over the cable.
Backfill in trench protecting cable
14. Install the dome onto the base by sliding the dome over the
bracket and base and then aligning the metal pins in the base
with the cutouts on the bottom edge of the dome. Once the
dome is seated in the cutouts, turn it to lock it into place.