ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 82)

4-1
C H A P T E R 4
Communication
After installing the sensors in the pipe and connecting the sensors to
the monitor, it is necessary to establish communication with the
monitor (through telemetry or the direct serial connection) and
activate the monitor. This chapter contains instructions on
establishing telephone service or a wireless connection at the
monitor location for communicating with the monitor remotely and
using the direct serial cable to communicate with the monitor on-
site. It also includes basic information concerning monitor
activation.
Note: Manhole and sewer system work involves confined
space entry and is inherently dangerous. Therefore,
installers and technicians must comply with all federal,
state, and municipal regulations concerning confined space
entry. ADS

is not responsible for any injuries, damages,
claims, or liability resulting directly or indirectly from the
use of this installation guide or the installation of any ADS
equipment.