ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 223)

Maintenance and Troubleshooting 10-11
Note: Some desiccant may be reused following a special
process designed to remove the moisture from the beads.
Please consult the desiccant manufacturer for instructions
on performing this procedure, when applicable.
Checking Communication Devices
Inspect the following communication devices during site visits:
 Lightning Protection Module Check the lightning
protection module for lightning strikes (visible arcing),
damaged or poor connections, or corrosion. Replace a burned
out module, and repair any bad or corroded connections in the
wiring.
 Network Interface Box If any problems exist with the
network interface box, check the connectors to ensure that the
cable entries are tight and waterproof. If this does not resolve
the problem, contact the telephone company.
Note: Make sure both the lightning protection module
and network interface box are still waterproof.
 Antenna Cable Check the cable for damage, kinks, or breaks
in the cable. Make sure the connector between the antenna
cable and the monitor is dry and sealed with rubber stretch
tape.