Panasonic NVDS5EG User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
b
t
SEARCH_____PHOTO ►SCENE
Ulfi1glLitH:l»!asra OFF ►ON
AUDIO OUT ►STI ST2 MIX
AUTOPRINT ►OFF ON
LCD MODE ►NORMAL BRIGHT
LCD/EVF SET ►OFF
ON
DISPLAY ►COUNTER MEMORY
TIMECODE OFF
DEUTSCH
ENGLISH
Auffinden des Endes des
aufgezeichneten Bandabschnittes
auf der Cassette
(Leerstellen-SuGhlauf)
Mit der Leerstellen-Suchlauf-Funktion können Sie das
Ende des aufgezeichneten Bandabschnittes auf einer
Cassette (oder einen aufnahmefreien Bandabschnitt
zwischen Aufnahmen) schnell und bequem auffinden.
1
Die Taste [VCR/GAMERA] drücken^ so
daß die Lampe [VCR] O ^ufleuchtet.
2
Die Taste [MENU] drücken.
Das Menü erscheint.
3
Den Regler [PUSH] drehen, um [BLANK
SEARCH] zu wählen.
4
Den Regler [PUSH] drückenj um [ON]
zu wählen.
Ca. 1 Sekunde vor dem Ende der letzten
aufgezeichneten Szene schaltet der Camerarecorder
auf Standbild-Wiedergabe um.
• Falls sich auf der ganzen Cassette kein aufnahmefreier
Bandabschnitt befindet, schaltet der Camerarecorder
am Bandende auf Stopp um.
• Nach beendetem Leerstellen-Suchlauf können Sie die
Taste [VCR/CAMERA] drücken, so daß die Lampe
[CAMERA] aufleuchtet, und dann mit dem Aufnehmen
beginnen. Die neue Szene wird mit sauberem
Szenenübergang an das Ende der vorhergehenden
Szene angefügt.
Searching for the End of the
Recorded Part on a Cassette
(Blank Search)
With the Blank Search Function you can quickly locate
the end of the recorded part on a cassette (or a blank
part between recordings).
1 Press the [VCR/CAMERA] Button so
that the [VCR] Lamp lights, d
2 Press the [MENU] Button.
The Menu appears.
3 Turn the [PUSH] Dial to select [BLANK
SEARCH].
4 Press the [PUSH] Dial to select [ON].
Approximately 1 second before the end of the last
recorded scene^ the Movie Camera switches over to
the Still Playback Mode.
• If there is no blank part on a cassette, the Movie
Camera stops at the end of the tape.
• When the Blank Search has finished, you can press the
[VCR/CAMERA] Button so that the [CAMERA] Lamp
lights and start recording. The new scene is recorded
with a smooth transition from the last to the new scene.
-60-