KERN & SOHN AET 200-4NM - Manual (Page 111)

AET_/PET_/ILT_NM-BA-e-1410 111
Status denotation:
• weighing A, measurement completed for procedure <Weighing A> or
<Weighing T+A>
• weighing T, measurements completed for procedure <Weighing A>
In order to preview detailed information on a sample, press field with its name.
The opened window contains the following data:
In case the following procedure is completed for a sample:
• weighing A only, then tare value is <0>,
• weighing T only, then value of weighing A is <0>
• weighing T+A, then for tare and weighing A the mass values are assigned.
Data on a weighed sample can be printed on a connected printer on pressing a
pictogram with a printer on display’s upper bar.
In order to preview data on weighing A, press <Weighing A> field:
In case in a given series there are samples for which weighing of initial mass
(Weighing A) is already completed, it is possible to carry out final weighing
(weighing B) for these samples.